Device For Testing Non-Solid Pins are used to conduct comprehensive tests of pulling, bending and torsion of capacitor lead-out terminals. Device For Testing Non-Solid Pins are used to test the mechanical strength of portable accessory pins.

Device For Testing Non-Solid Pins test performance parameters
1. Power AC 220V 50Hz
2. Control: Mitsubishi PLC + touch screen control
3. Tensile test: vertical loading with weights; (gentle application of force without sudden change)
4. Tensile loading time: adjustable from 1 to 999s
5. Load weights: 0.5N, 1N, 1.25N, 2.5N, 5.0N, 10N, 20N, 40N, a total of eight; Accuracy: ± 1%
6. Bending test: only one pin is tested at a time
7. Bending angle: adjustable from 1 to 90 degrees, one-way and two-way can be selected; angle accuracy: ±2 degrees
8. Bending rate: 1～60S/time; Accuracy: ±3%
9. Bending times: 1～9999 times; Accuracy: ±1 times
10. Torsion: adjustable from 1 to 360 degrees; accuracy: ±1 degree;
11. Number of twists: 1 to 9999 times
12. Working environment: temperature: 0～40℃; relative humidity≤80%