Device For Testing Non-Solid Pins ZZ-E01 Capacitor Pin Wire Tensile Bending Tester gets rid of the traditional manual testing method of capacitor, inductor and filter pin wire. The device adopts Panasonic PLC control and touch screen display operation, making The test positioning is accurate, the timing is excellent and the performance is stable. It also has humanized functions such as power-off memory (part of the parameters), error warning, and experimental sound. It also uses a high-performance stepper driver to control the power source.

Device For Testing Non-Solid Pins Tensile Test:
1. Manually load the weight vertically;
2. Loading time: 0～999s, continuously adjustable;
3. Bend test: Bend one lead at a time;
4. Bending angle: adjustable from 0 to 90 degrees;
5. Its accuracy: ±2 degrees;
6. Action cycle: 1s～10s/time (bending angle: 30 degrees, 45 degrees, 90 degrees);
7. Its accuracy: ±3%;
8. Bending times: 1～999 times;
9. Its accuracy: ±1 times;
10. Torsion test: it can be twisted continuously for 180 degrees;
11. Its accuracy: ±2 degrees;
12. Instrument size: about 600mm (length) × 450mm (depth) × 750mm (height)
13. Working power: 220V ± 10%, 50/60Hz ± 2Hz.