PRODUCT CATEGORY
-
Home Appliances Test Equipment
-
Environmental Test Equipment
-
Plugs and socket-outlet Test Equipment
-
Mechanical Strength Test Equipment
-
Material Fire Hazard Test Equipment
-
Energy Efficiency Test Equipment
-
Enclosure Protection Test Probes
-
Wire and Cable Test Equipment
-
Luminaires Test Equipment
-
Electric Tools Test Equipment
Performance Test Equipment For Washing Machine
Place of Origin: China
Brand Name: HONGCE
Delivery Time: 3 months
Payment Terms: T/T or LC
Certification: ISO/IEC 17025 Certificate
Model: HCWMEF01
Standard: IEC 60456
Test sample: washing machines
Usage: energy efficiency testing
Test software: labview
Performance Test Equipment For Washing Machine
Standard:
IEC 60456 ‘Clothes washing machines for household use - Methods for measuring the performance’;
Application:
It is mainly used for washing machines performance test, Washing Machine Energy Efficiency test, Can measure the parameters such as washing capacity, cleaning rate, power consumption and water consumption etc.
Main Function:
NO. |
Item |
Inspection Content and Requirements |
1 |
Environmental Control |
The ambient temperature of the test room shall be maintained at (23 ± 2) °C throughout the washing machine test. The measured ambient temperature for washing machine testing shall be reported, it shall be rounded to the nearest 0,5 °C. The ambient humidity is not specified for washing machine testing. |
2 |
Water hardness control |
For all treatments of the test load prior to a test series and all washing machine test runs in accordance with this document either hard water or soft water may be used. If hard water is used it shall have a total water hardness of (2.5 ± 0.2) mmol/l. If soft water is used it shall have a total water hardness of (0.5 ± 0.2) mmol/l. |
3 |
Water Temperature Control |
The temperature of the laboratory supply water to each test washing machine shall be measured and recorded to the nearest 0,1 °C. It shall be: – for cold water (15 ± 2) °C for all reference programmes except Cotton 20 °C; – for cold water (20 ± 2) °C is the recommended option when using the Cotton 20ºC reference programme. This is recommended for test washing machine programmes with no internal heating and cold fill only (cold water wash). The cold water supply temperature to the reference machine in this case may be the same as the test washing machine or it may be 1 5 ºC as specified above. – for hot water the temperature indicated by the manufacturer ± 2 K, or (60 ± 2) °C, if no value is given. |
4 |
Water Pressure Control |
The static (gauge) pressure of the laboratory supply water at the inlet to each test washing machine shall be maintained at (240 ± 50) kPa throughout the test, including during filling operations. |
5 |
Energy consumption Calculation |
The energy consumed over a programme (called the programme energy), which is the energy consumption value determined under this document, is the sum of the electrical energy plus any cold water correction plus the energy embodied in any hot water . Programme energy: The programme energy is determined as follows: W total = W et + W ct + W ht |
6 |
Energy efficiency rating |
The system can automatically calculate and determine the energy efficiency grade according to the corresponding data obtained from the measurement. |
Guangzhou HongCe Equipment Co., Ltd

Tel:18826455520

WhatsApp: +86 18826455520

Skype : hongceauto@gmail.com

WeChat : +86 18826455520

Email:hongce@iectester.com

Address:Room 202, Building 42, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong, China
智能分站
Copyright ©2016 Guangzhou HongCe Equipment Co., Ltd All Rights Reserved. 粤ICP备15039889号
Powerby:300.cn