Battery Over-Charged And Over-Discharged Test System

This system is suitable for comprehensive performance testing of lithium polymer, lithium ion, nickel hydrogen, nickel cadmium, lead acid and other batteries, Battery Materials Research, The formation and capacity separation of small batch battery production, Assembled battery, laptop/tablet battery, smart phone battery, charging treasure, new energy electric vehicle single 18650 lithium battery and other product testing.

Number of views:

1000

Product serial number

HC6202

Category

Battery Testing Equipment

Quantity

-

+



1

Datils

Conforms to IEC62133-1/-2:2017 clause 7.1, 7.2.1, 7.3.8, 7.3.9, IEC62133-1/-2:2012 clause8.1.1, 8.1.2, 8.2.1, 8.3.6, 8.3.7 IEC60086-4 clause 6.5.8 6.5.9 IEC60622, IEC60623, IEC 60086-1, IEC61951, IEC61960

This system is suitable for comprehensive performance testing of lithium polymer, lithium ion, nickel hydrogen, nickel cadmium, lead acid and other batteries, Battery Materials Research, The formation and capacity separation of small batch battery production, Assembled battery, laptop/tablet battery, smart phone battery, charging treasure, new energy electric vehicle single 18650 lithium battery and other product testing.

Battery.

The system hardware is stable and reliable, and each channel has independent constant current and hardware constant voltage source.
Each channel can set the work step independently; increase the professional work step setting scheme; in any case, "stop" (including power off) work step "connect" function.
Data acquisition speed is fast, accurate capture of voltage and current changes in detail, with log function. Powerful data and curve processing, report function. Data and curves can be exported to excel and word. Data and curves can be edited.
Various types of fixtures can be used to test different types of electric cores, button batteries and composite batteries.
Can be used offline, measurable temperature and internal resistance, and laptop battery smbus function
It can be connected by serial port, network and USB. Using c/s mode, remote control.

Input power	AC 220V ±10% / 50Hz (Or customized according to client's requirements)
Input active power	5280 W
Resolution	AD:16bit；DA:16bit
Input impedance	≥1MΩ
Voltage	Constant voltage range control		0.1V～20V (can be customized)
	Minimum discharge voltage		0V
	Accuracy		± 0.1% of FS
	Stability		± 0.1% of FS
Current	Per channel output range		0.1A～30A (can be customized)
	Accuracy		± 0.1% of FS
	Constant voltage cut-off current		0.04A
	Stability		± 0.1% of FS
Power	Single channel maximum output power		400w
	Stability		± 0.2% of FS
Time	Current response time		Maximum current rise time 20ms
	Step time range		≤(365*24)hour /step ;
Data record	Data recording condition		Minimum time interval:100ms
			Minimum voltage interval:40mV
			Minimum current interval:40mA
	Recording frequency		10Hz
Charge	Charging mode		Constant current charging, constant voltage charging, constant current and constant voltage charging, constant power charging, constant current and constant voltage charging of the battery pack
	Cut-off condition		Voltage, current, relative time, capacity, -△V
Discharge	Discharge mode		Constant current discharge, constant power discharge and constant resistance discharge
	Cut-off condition		Voltage, current, relative time, capacity, -△V
Pulse mode	Charge		Constant current mode and constant power mode
	Discharge		Constant current mode and constant power mode
	Minimum pulse width		500ms
	Number of pulses		A single pulse step supports 32 different pulses
	Continuous charge and discharge switching		A pulse step can achieve continuous switching from charging to discharging
	Cut-off condition		Voltage, relative time
DCIR test	Support custom fetch points for DCIR calculation
Cycle	Cycle test range		1～65535 times
	Single cycle working step		254
	Loop nesting		With nested loop function, maximum support for 3 layer nesting
Protection	Power-down data protection
	Offline testing function
	The safety protection conditions can be set. The setting parameters include: voltage upper limit, voltage lower limit, current upper limit, current lower limit, capacity upper limit, delay time
	Anti-reverse function
IP protection level	IP20
Channel characteristics	Double closed loop structure of constant current source and constant pressure source
Channel control mode	Independent control
Voltage and current detection sampling	Four line connection
Noise	<85dB
Data base	Using MySQL database to centrally manage test data
Communication mode of upper computer	Based on TCP/IP protocol
Server disk configuration	500GB
Data output mode	EXCEL 2003,2010,TXT
Server operating system	Windows 7
Communication interface	Network port
Equipment working environment requirements
Working temperature range	0℃~40℃
Storage temperature range	-10℃~50℃
Relative humidity range of working environment	≤70% RH(No condensation)
Relative humidity range of storage environment	≤80% RH(No condensation)
Fixture size and size
Fixture type	Alligator fixture
Per unit chassis size (WDH)(mm)	18U(19”),6006001000
Total number of channels	Test 8 channel
Auxiliary channel (Optional)	Auxiliary channel type	Temperature and voltage
	Temperature range	-25℃～110℃(Thermistor)
	Temperature precision	±1℃
	Temperature resolution	0.1℃
	Voltage range	-5V～5V
	Voltage accuracy	± 0.1% of FS
Number of temperature-assisted channels per channel (optional)	Fill in as required (up to 248 temperature auxiliary channels)
Voltage auxiliary channel per channel (optional)	Fill in as needed (up to 248 voltage assist channels)
Protection condition of auxiliary channel	The auxiliary channel protection conditions can be set, and the parameters can be set as follows: upper limit of temperature, lower temperature limit, upper limit of voltage, lower voltage limit and voltage difference of single cell.
Remarks: Incompatibility with protection board battery with soft-start function