PRODUCT CATEGORY
-
Home Appliances Test Equipment
-
Environmental Test Equipment
-
Plugs and socket-outlet Test Equipment
-
Mechanical Strength Test Equipment
-
Material Fire Hazard Test Equipment
-
Energy Efficiency Test Equipment
-
Enclosure Protection Test Probes
-
Wire and Cable Test Equipment
-
Luminaires Test Equipment
-
Electric Tools Test Equipment
Abrasion Resistance Test Equipment
Place of Origin: China
Brand Name: HONGCE
Delivery Time: 30 days
Payment Terms: T/T
Certification: ISO/IEC 17025 Certificate
Model: HJ0604
Test Station: 1 Station
Scratching Force: 10N±0.5N
Scratches Distance: 0-50mm, can be preset
Scratching Angle : 80-85°, fixed by fixture
Abrasion Resistance Test Equipment
Standard:
IEC 60335-1 'Household and similar electrical appliances – Safety – Part 1: General requirements' clause 21.2 , IEC 60950 clause 2.10.8.4, and etc.
Application:
It is used to process scratch test for the solid insulation boards and accessible parts of house appliances and similar products, to ensure that accessible parts of solid insulation shall have sufficient strength to prevent penetration by sharp implements.
Test sample:
Household appliances, printed circuit board.
Feature:
The surface of the insulation is scratched by means of a hardened steel pin, the end of which has the form of a cone with an angle of 40°. Its tip is rounded with a radius of 0,25 mm ± 0,02 mm. Scratching through five pairs of conductive parts, including its interval, an interval should be subjected to the largest part of the potential gradient during the test. And the pin is held at an angle of 80° – 85° to the horizontal and loaded so that the force exerted along its axis is 10 N ± 0,5 N. The scratches are made by drawing the pin along the surface of the insulation at a speed of approximately 20mm/s±5mm/s. Two parallel scratches are made. They are spaced sufficiently apart so that they are not affected by each other, their length covering approximately 25 % of the length of the insulation. Two similar scratches are made at 90° to the first pair without crossing them.
The scratches shall be at least 5 mm apart and at least 5 mm from the edge of the specimen.
The device adopts PLC + touch screen control system, stepping motor drive, the scratch distance, scratch times and speeds can be preset, the test pin can rotate 90 ° angle automatically, scratch test in both vertical and horizontal directions can be easily realized.
Parameters:
Input voltage |
220V/50Hz |
Control system |
PLC + touch screen |
Drive mode |
stepper motor-driven |
Scratching speed |
0-25mm/s adjustable |
Testing times |
0-9999times,it can be preset |
Scratching distance |
Adjustable |
Working table |
360° rotatable |
Scratching pressure |
10N±0.5N,it can be equipped with the weight of 20N to reach the scratching pressure of 30N±0.5N |
Radius of Steel Pin |
0.25±0.02mm |
Guangzhou HongCe Equipment Co., Ltd

Tel:18826455520

WhatsApp: +86 18826455520

Skype : hongceauto@gmail.com

WeChat : +86 18826455520

Email:hongce@iectester.com

Address:Room 202, Building 42, No. 539, Shibei Industrial Road, Dashi Street, Panyu District, Guangzhou, Guangdong, China
智能分站
Copyright ©2016 Guangzhou HongCe Equipment Co., Ltd All Rights Reserved. 粤ICP备15039889号
Powerby:300.cn