ONLINE MACHINE

  • 产品名称: Electric Wire Abrasion Test Apparatus
  • NO.: HDX1304
  • Views : 4

 IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.

 It is used for checking the wear resistance test of the completed flexible cables.

 Completed flexible cables.

 

 This test shall be made on three pairs of samples of flexible cable, each sample having a length of about 1 m. In each pair one sample shall be wound so as to give nearly two turns on a fixed reel having a diameter of 40 mm at the bottom of the groove as shown in figure 3, the distance between the flanges of the reel being such that the turns are in close contact with each other. The sample shall then be fixed to prevent any movement relative to the reel. The other sample shall be placed in the groove formed by the turns and a weight having a mass of 500 g shall be attached to one end. The other end shall be moved up and down over a distance of 0.10 m, at a rate of about 40 single strokes per minute.

Power Supply

AC220  50HZ

Fixed Shaft Diameter

Φ40±0.3mm

Test Rate

Single strokes 40±1 times/minute

Test Stroke

0.1mm up-and-down movement

Working Station 3
Weight 500±5g*3
Counter 0~999999 (can be preset)
Dimension 1200×400×1400 (mm)

 

CONSULTATION

 
Title:
 
Your name:
*
Less than or equal to 20 characters (including AZ, az ,0-9, Chinese characters, excluding special characters)
Your E-mail:
*
Example:example@mail.com
Tel:
 
Less than or equal to 32 characters (including 0-9, -, (,), comma)
Content:
* Entered characters:0 Word
Less than or equal500Character
Verification code:
   
GUANGZHOU HONGCE EQUIPMENT CO., LTD
FOLLOW US