ONLINE MACHINE

  • 产品名称: Vessel For Dropping Test
  • NO.: HJ0632
  • Views : 6

 This device meets the standard of IEC60335-2-9 clause 21.101,Household and similar electrical appliances-Safety-Part 2-9:Particular requirements for grills, toasters and similar portable cooking appliances.

 

 It is used for testing the surfaces of hotplates of glass-ceramic or similar material shall withstand the stresses liable to occur in normal use.

 

 Hotplates of glass-ceramic or similar material.

 

 Making of pure aluminum, with lid, prevent sand leakage. The hotplate is operated at rated power input with its control adjusted to the highest setting. Induction hotplates are operated as specified in Clause 11. When steady conditions are established, the hotplate is switched off and a vessel has a copper or aluminum base that is flat over a diameter of 120mm±10mm, its edges being rounded with a radius of at least 10mm. It is uniformly filled with at least 1.3kg of sand or shot so that the total mass is 1.80kg±0.01kg.

The vessel is dropped 10 times onto each cooking zone. It is removed and the appliance is operated at rated power input until steady conditions are established.

 

Item Name

Hotplates dropping aluminum plate

Material

Aluminum 

Base Flat Diameter

120mm±10mm

Edges rounded

R10

Weight 0.5kg
Mass of the Sand More than 1.3g (dropping total weight:1.8±0.01kg)
Dropping Height 150mm
Dropping Times 10

 

CONSULTATION

 
Title:
 
Your name:
*
Less than or equal to 20 characters (including AZ, az ,0-9, Chinese characters, excluding special characters)
Your E-mail:
*
Example:example@mail.com
Tel:
 
Less than or equal to 32 characters (including 0-9, -, (,), comma)
Content:
* Entered characters:0 Word
Less than or equal500Character
Verification code:
   
GUANGZHOU HONGCE EQUIPMENT CO., LTD
FOLLOW US