ONLINE MACHINE

  • 产品名称: Current-Carrying Hoses Crushing Resistance Tester
  • NO.: Hj0614
  • Views : 6

 This device meets the standard of IEC60335-2-2, clause 21.101.

 Suitable for the Current-carrying hoses crushing resistance tester.

 Vacuum cleaner hoses, water suction type cleaning apparatus tube, washing machine water pipe.

 The hose is placed between two parallel steel plates each having a length of 10 mm, a width of 50 mm and the edges of the longer sides rounded with a radius of 1mm. The axis of the hose is positioned at right angles to the longer sides of the plates. The plates are placed at a distance of approximately 350mm from one end of the hose. The steel plates are pressed together at a rate of 50 mm/min±5 mm/min until the applied force is 1.5kN. The force is then released and electric strength test of 16.3 is carried out between the conductors connected together and the saline solution.

Power Supply

AC220V  50HZ

Applied Force

1.5kN

Pressue Speed

50±5mm/min

Steel Plate Specification

Length of 10 mm, a width of 50 mm and the edges of the longer sides rounded with a radius of 1mm

Sample Placement The plates are placed at a distance of approximately 350mm from one end of the hose
Pressure Mode Motor-driven
Size and Weight 1000*500*1500mm,200kg

 

CONSULTATION

 
Title:
 
Your name:
*
Less than or equal to 20 characters (including AZ, az ,0-9, Chinese characters, excluding special characters)
Your E-mail:
*
Example:example@mail.com
Tel:
 
Less than or equal to 32 characters (including 0-9, -, (,), comma)
Content:
* Entered characters:0 Word
Less than or equal500Character
Verification code:
   
GUANGZHOU HONGCE EQUIPMENT CO., LTD
FOLLOW US