Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC61965 Mechanical safety of cathode ray tubes.
For screen size more than 16cm of the cathode ray tubes anti explosion impact and mechanical impact verification, or explosion of the cathode ray tubes protecting verification to the equipment enclosure.
For screen size more than 16cm of the cathode ray tubes and other test equipment.
The cathode ray tube is installed on the test chamber, the test chamber should be placed in a support level with height above the surface of 75cm±5cm,there should be no fragment more than 2g after testing each cathode ray tube, it is placed on the ground from the tube surface projection with 500mm, high 250mm of the baffle, and there should be no any fragment flying on the same baffle at 2000mm.
1、Use aluminum alloy material, beautiful appearance.
2、Equip with diamond scratch pin.
5、Scratch area：Diameter of 20mm
6、Range of steel ball: Ø40mm，500g.
7、Steel wire rope:ø0.6-0.8
8、Test item：Mechanical strength test (small ball impact test), explosion test (emission shock), high energy impact test