• 产品名称: Glow Wire Tester IEC60695-2-10~IEC60695-2-13
  • NO.: GW-1/GW-2
  • Views : 108

 IEC60695-2-10, IEC60695-2-13 and UL746A.

 This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test initiation temperature and flammability index of related glowing filament.

 Electrical equipment and its components and parts, solid electrical insulating materials and other solid combustible materials.

 est principle: the glowing filament whose material and shape is required(Ni77/Cr20) is heated to the testing temperature of  550 ℃ ~ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (0.95N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the burning time, the users can judge the ignition danger of electric and electronic products. It is used for the ignition test, ignition temperature (GWIT) test, flammability test and flammability index (GWFI) test of solid insulating material and other solid combustible material.



GW-2(Touch screen)

Working voltage



Control operation mode

Electrical control, button operation

PLC control, 7 inch color touch screen operation, with infrared remote control

Glowing filament

Ф4mm ± 0.04mm (> 77 % Ni/20 ± 1 % Cr) special standard ring shape,horizontal standing

Specimen pressure on  glowing filament 0.95N±0.1N
Maximum depth of heating  7mm ± 0.5mm 
Specimen movement speed  10mm /s ~ 25mm /s 

Temperature calibration

Calibration temperature:960°±10°C, the hot wire by electric heating
  Thermocouple: RS imported 1mm armour nickel-chromium/nickel/ nickel aluminum K-Thermocouple, temperature resistance 1100°
  Silver foil: purity 99.8%, area :2m², thickness:0.06mm
Tray A layer of silk paper (12~30g/m³) is covered on the 10mm thick pine board, with a distance of 200±5mm below the test sample
Test chamber >0.5 cube,sample distance from the inside of the box is greater than 100mm, black yogon background,background illuminance ≤ 20Lx,with exhaust fan
Testing time 30s±1s
Test procedure The test sample is driven by the car and automatic run, the car will return automatically after glow-wire entered the test sample of 7mm
Lighting Equip with lighting in the test chamber, with control
Dimension 1100*550*1200mm,140kg



Your name:
Less than or equal to 20 characters (including AZ, az ,0-9, Chinese characters, excluding special characters)
Your E-mail:
Less than or equal to 32 characters (including 0-9, -, (,), comma)
* Entered characters:0 Word
Less than or equal500Character
Verification code: