搜索
Search
产品中心

产品中心


PRODUCT CATEGORY

Location:
Homepage
/
/
/
Over-Charged And Over-Discharged Explosion Proof Test Chamber
1/1
Number of views:
1000

Over-Charged And Over-Discharged Explosion Proof Test Chamber

It is used for when the battery is overcharge and over-discharged, Charge and discharge test, put the battery into the explosion proof test chamber, external charge discharge tester, protect the operators and instruments ,the test chamber can be customized by customer’s requirements .
Number of views:
1000
Product serial number
HC6203
Quantity
-
+
1
Datils

 

 

 Conforms to IEC62133-1/-2:2017 clause clause 7.1, 7.2.1, 7.3.8, 7.3.9, IEC62133-1/-2:2012 clause 8.2.1, 8.3.6, 8.3.7, IEC 60086-1, IEC60622  IEC60623, IEC61951, IEC61960 

 

 

 

This equipment is used to prevent explosion or burning unnecessary damage to the test personnel in the battery overcharge and over discharge. It is made of steel material with good texture and anti explosion effect.

 

It is used for when the battery is overcharge and over-discharged, Charge and discharge test, put the battery into the explosion proof test chamber, external charge discharge tester, protect the operators and instruments ,the test chamber can be customized by customer’s requirements .

 

 

 

Battery.

 

 

 

Eight anti-explosion chambers, divided into left, middle and right parts

 

 

Inner Chamber Size

W500 X H500 X D500mm*8

Inner chamber Material

1.5mm stainless steel

External Chamber Material

Cold rolled steel spray treatment

Explosion-proof Glass

Double 200X200 explosion proof glass, visible

Chamber door

Connected to the chamber by powerful hinge, with explosion proof lock

Bottom

One piece of marble slab to protect from battery external short circuit

Top

Equipped with a high brightness energy-saving lamps to illuminate the entire test space

Venting fan

A strong exhaust fan is installed in the back of the chamber

Pressure relief door

Built in the back of each chamber. In the event of a battery explosion, the door will open and release pressure.

Testing port

Diamter:50mm cable port with stainless steel cover

Control Panel

Control the venting fan and lighting

Inside

2 power line with two insulated handle thread clamp inside the chamber, which is used to clamp the positive and negative pole of the battery

Wheels

Installed with universal wheel at the bottom of the chamber

Power source

AC 220V 2A

We could not find any corresponding parameters, please add them to the properties table

Other

Previous page
1

Copyright ©2016  Guangzhou HongCe Equipment Co., Ltd All Rights Reserved. 粤ICP备15039889号

Powerby:300.cn