Hotline

+86-020-31143909

搜索

Search

产品中心

PRODUCT CATEGORY

Product categories 



Location：

Homepage

/

Products

/

Environmental Test Equipment

/

Oscillating Tube Test Device

1/1

Number of views:

1000

Number of views:

1000

Product serial number

Category

Environmental Test Equipment

Quantity

-

+



1

Datils

Oscillating Tube Test Device For IPX3 and IPX4

Standard:

IEC 60529 ‘Degrees of protection provided by enclosures (IP Code)’ Clause 14.2.3, 14.2.4 and Figure 4;

And other standard like IEC 60884-1, IEC 60335-1, IEC 60598-1.

Application:

Test device to verify protection against spraying and splashing water; second characteristic numerals 3 and 4 (oscillating tube). It is used for the testing of IPX3 and IPX4.

Test sample:

The test apparatus with water proof functions, such as electronic appliances, lamps, electrical cabinets, electrical components, car, motorcycle, electrical products (such as automotive instrument, all kinds of switches, micro motors, etc.)

Feature:

Using PLC control, motor drive oscillating tube to do the reciprocating motion at a certain angle, at the same time control the water flow, the turntable rotates at a certain speed, so that to make every side of the sample testing uniformly.

Parameters:

Item	Parameters
Input power	Single-phase AC220V,50Hz
Water supply	Water flow rate > 10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit
Control and operation	PLC intelligent control, 7 inch color touch screen operation
The size of the oscillating tube	Standard coming with three size of oscillating tube, R200, R400, R600, R800, R1000, R1200, R1400, R1600mm for option, made of stainless steel
Needle hole	Φ0.4mm
Included angle of two holes	IPX3: 120°; IPX4: 180°
Pendulum angle	IPX3: 120° (±60°); IPX4: 350°(±175°)
Raining speed	IPX3: 4 s/time (2×120°); IPX4: 12 s/time (2×350°);
Water flow	1-10L/min adjustable
Testing time	0.01S～99hours 59min, can be preset
Turntable	Diameter: Φ600mm; Rotate speed:1r/min, Can be paused at four aspects, Load bearing≤150 kg electrical equipment
Pressure gauge	0~0.25MPa
Site requirements	Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch (or socket) used for equipment. With good function of inflow and drainage. Ground installation
Area covered	It is set according to the selected oscillating tube