搜索
Search
产品中心

产品中心


PRODUCT CATEGORY

Location:
Homepage
/
/
/
Electric Wire Abrasion Test Apparatus
1/1
Number of views:
1000

Electric Wire Abrasion Test Apparatus

It is used for checking the wear resistance test of the completed flexible cables.
Number of views:
1000
Product serial number
HDX1304
Quantity
-
+
1
Datils

Standard

IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirementsIEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.

Application

It is used for checking the wear resistance test of the completed flexible cables.

Test sample

Completed flexible cables.

Feature

This test shall be made on three pairs of samples of flexible cable, each sample having a length of about 1 m. In each pair one sample shall be wound so as to give nearly two turns on a fixed reel having a diameter of 40 mm at the bottom of the groove as shown in figure 3, the distance between the flanges of the reel being such that the turns are in close contact with each other. The sample shall then be fixed to prevent any movement relative to the reel. The other sample shall be placed in the groove formed by the turns and a weight having a mass of 500 g shall be attached to one end. The other end shall be moved up and down over a distance of 0.10 m, at a rate of about 40 single strokes per minute.

Parameters

Power supply

AC220V 50Hz

Fixed shaft diameter

Φ40±0.3mm

Test rate

Single strokes 40±1 times/minute

Test stroke

0.1mm up-and-down movement

Working station

3

Weight

500±5g*3

Counter

0~999999 (can be preset)

Dimension

1200×400×1400 (mm)

We could not find any corresponding parameters, please add them to the properties table

Other

Previous page
1

Copyright ©2016  Guangzhou HongCe Equipment Co., Ltd All Rights Reserved. 粤ICP备15039889号

Powerby:300.cn