搜索
Search
产品中心

产品中心


PRODUCT CATEGORY

Location:
Homepage
/
/
/
Glow Wire Tester IEC60695-2-10~IEC60695-2-13
1/1
Number of views:
1000

Glow Wire Tester IEC60695-2-10~IEC60695-2-13

This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test initiation temperature and flammability index of related glowing filament.
Number of views:
1000
Product serial number
GW-1/GW-2
Quantity
-
+
1
Datils

Standard

IEC60695-2-10, IEC60695-2-13 and UL746A.

Application

This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is suitable for electric and electronic products, household appliances and other material to do fire hazard testing. It is also used in the No flame ignition source fire test to test initiation temperature and flammability index of related glowing filament.

Test sample

Electrical equipment and its components and parts, solid electrical insulating materials and other solid combustible materials.

Feature:

Test principle: the glowing filament whose material and shape is required(Ni77/Cr20) is heated to the testing temperature of  550 ℃ 960 ℃ for 1 min by using the glow wire tester with large current. Then using required pressure (0.95N) vertically burns the test sample for 30s. By observing whether the test sample and bedding object ignite or the burning time, the users can judge the ignition danger of electric and electronic products. It is used for the ignition test, ignition temperature (GWIT) test, flammability test and flammability index (GWFI) test of solid insulating material and other solid combustible material.

 

Parameters

Parameters\Model

GW-1

GW-2Touch screen

Working voltage

220V/50Hz

220V/50Hz

Control operation mode

Electrical control, button operation

PLC control, 7 inch color touch screen operation, with infrared remote control

Glowing filament

Ф4mm ± 0.04mm (> 77 % Ni/20 ± 1 % Cr) special standard ring shapehorizontal standing

Specimen pressure on  glowing filament

0.95N±0.1N

Maximum depth of heating

7mm ± 0.5mm

Specimen movement speed

10mm /s 25mm /s

Temperature calibration

Calibration temperature:960°±10°C, the hot wire by electric heating

Thermocouple: RS imported 1mm armour nickel-chromium/nickel/ nickel aluminum K-Thermocouple, temperature resistance 1100°

Silver foil: purity 99.8%, area :2m², thickness:0.06mm

Tray

A layer of silk paper (12~30g/m³) is covered on the 10mm thick pine board, with a distance of 200±5mm below the test sample

Test chamber

>0.5 cubesample distance from the inside of the box is greater than 100mm, black yogon backgroundbackground illuminance ≤ 20Lx,with exhaust fan

Testing time

30s±1s

Test procedure

The test sample is driven by the car and automatic run, the car will return automatically after glow-wire entered the test sample of 7mm

Lighting

Equip with lighting in the test chamber, with control

Dimension

1100*550*1200mm140kg

We could not find any corresponding parameters, please add them to the properties table

Other

Previous page
1

Copyright ©2016  Guangzhou HongCe Equipment Co., Ltd All Rights Reserved. 粤ICP备15039889号

Powerby:300.cn